What Are The Requirements For The Environment And Power Supply Of The V Grooving Machine?

1. Environmental requirements

There are no requirements for the use environment of the V grooving machine, and it can be placed in any workshop. However, to avoid direct sunlight and other heat radiation, avoid too humid or dusty places, especially places with corrosive gases. Corrosive gases can easily cause corrosion and deterioration of electronic components, or cause poor contact, or cause short circuits between components. affect the normal operation of the machine tool. Keep away from equipment with large vibrations, such as punch presses, forging equipment, etc.

2. Power requirements

The V grooving machine has no specific requirements on the power supply, and generally allows fluctuations of ± 10%. However, due to the specific conditions of the power supply, not only the fluctuation range of the power supply is large (sometimes far exceeding 10%), but also the quality is poor. There are some high-frequency clutter signals superimposed, which can be clearly observed with an oscilloscope, and sometimes a large-amplitude interference signal appears, which destroys the program or parameters of the CNC system and affects the normal operation of the machine tool. The metal slotting machine adopts a special line power supply (separate one line from the low-voltage power distribution room for the use of the CNC planer alone) or adds a voltage stabilizing device, which can reduce the impact of power supply quality and reduce electrical interference.